CineTension2 Series

with No Comments

A: No, Elite manual and electric projection screens are not designed for use as a window curtain and should never be exposed to direct sunlight.  Prolonged exposure to solar radiation will destroy synthetic materials and such damage is not covered by our standard warranty.

A: Elite offers a wireless Universal 5-12 volt projector accessory (Part# ZU12V) for projectors that do not have a trigger output. Contact your preferred Elite Screens reseller or visit for information about purchasing this product.

A: For the best possible results, an anamorphic lens is recommended.  However, it is possible to get a 2.35:1 screen format as long as you can live with the “black bars” created when a mismatched 16:9 native aspect ratio projecto is set up to fit a wider projection screen format.  It is simply a matter of personal preference.

A: The CineTension 2 Series is available only in a black casing and cannot be special ordered with a white case.

A: You can extend the length of your cable using the ZSP-12V-50B. This 50 feet RJ-45 cable includes an extender plug coupler to allow you to join connections to your existing accessory.

A: Elite strongly recommends using either a standard surge protector or a power conditioner on all electric projection screens.

A: The CineWhite® screen material can be cleaned with a soft cloth using mild soap and water.

A: Yes, all CineTension2 series screens can be mounted in a ceiling using our in-ceiling trim kit which can be found in our accessories section.

A: Yes, the CineTension 2 has a RJ-45 5-12 volt trigger input.

A: Check your projector’s manual to see if your projector has a 5-12 volt trigger output. If it does then your projector has the ability to synchronize with your CineTension 2.

A: Yes, the CineTension 2 includes an RJ-45 5-12 volt trigger.

A: No, Elite Screens understand the need to hardwire your electric screen and therefore will not void your warranty.

A: Elite provides binary codes for the IR remote, see below.

  • Up: 1111 0000 0001
  • Stop: 1111 0000 0010
  • Down: 1111 0000 0100

A: Yes, Elite’s electric screen products are compatible with Harmony remotes and in their database.
Please visit the Harmony website for further assistance with programming your remote with our electric screens.

A: The frequency of the RF remote is 433MHz.

A: No, your screen’s Top Black border has been set to deploy to its full extent. Attempting to increase will damage the motor and void your warranty with EliteProAV.

A: Yes, the hanging brackets on the CineTension2 slides horizontally along the casing.

A: Each Elite Screens’ model number starts with the product series name. Follow by case color (if applicable, certain models only available in one color), screen material, screen aspect ratio and product series version. Lastly, extra black drop and its length (if applicable). Here is an example.

TE 135 H W 2 -E12

  • TE: CineTension 2
  • 135: 135” Diagonal
  • W: CineWhite® Material (R: Wraith Veil Rear Material / A1080: AcousticPro 1080P Sound Transparent Material / A1080P2: AcousticPro 1080P2 Sound Transparent Material / G: PowerGain Material / C: CineGrey Material)
  • H: 16:9 Format (V: 4:3 / C: 2.35:1 depending on model)
  • -E12: Extra Black Drop 12”
  • 2: Version 2

A: Passive 3D occurs in real time with both eyes seeing an actual picture as opposed to the alternating right-Left eye flickering of active 3D technology. The advantage in this is that the image is brighter because it is simultaneously shown to both eyes. With Active 3D the glasses obstruct the vision of one eye while allowing the other to see the picture alternating at about 60 exposures per eye per second. Essentially the viewer is blindfolded half the time without really being aware of it. The “flickering” of Active 3D technology is that  cross-talk and shadowing artifacts occur more easily. It also has a higher tendency to create eye-discomfort in viewers. Passive 3D allows viewers to see the image more comfortably  with greater brightness and clarity. Passive 3D glasses are also inexpensive so that they may be easily obtained in quantity and do not suffer from mechanical malfunction like the electrically powered active 3D glasses

A:  Please click here for the motor information of your Elite electric screen.

A: The power cable length for all CineTension2 Series models is approximately 98.4″ (2.5M). Note: This measurement is accurate for USA only, other countries may be equipped with different lengths for each model.

error: Content is protected