Kestrel Series

with No Comments

A: Yes, you can buy a screen material sample by clicking here.

A: You can extend the length of your cable using the ZSP-12V-50B. This 50 feet RJ-45 cable includes an extender plug coupler to allow you to join connections to your existing accessory.

A: Elite strongly recommends using either a standard surge protector or a power conditioner on all electric projection screens.

A: Yes, the Kestrel series is available with our popular CineWhite® tensioned screen material in the Kestrel Tension series models.

A: No, Elite Screens understand the need to hardwire your electric screen and therefore will not void your warranty.

A: The power cable length for all Kestrel Series models is approximately 98.4″ (2.5M). Note: This measurement is accurate for USA only, other countries may be equipped with different lengths for each model.

A: Elite provides binary codes for the IR remote, see below.

Up: 1111 0000 0001
Stop: 1111 0000 0010
Down: 1111 0000 0100

A: Yes, Elite’s electric screen products are compatible with Harmony remotes and in their database.
Please visit the Harmony website for further assistance with programming your remote with our electric screens.
http://myremotesetup.com/easyzapper/New/Main.asp

A: The frequency of the RF remote is 433MHz

A: No, your screen is set to rise to its full extent. Attempting to increase will damage the motor and void your warranty with Elite Screens

A: Here is a full list of the model numbers for the Kestrel Series: FE72V, FE84V, FE92V, FE100V, FE72H, FE84H, FE92H, FE100H, FE85C, FE92C, FE96C

A:  Please click here for the motor information of your Elite electric screen.

error: Content is protected