VMAX Tab-Tension Dual Series

with No Comments

A: Yes, you can buy a screen material sample by clicking here.

A: You can extend the length of your cable using the ZSP-12V-50B. This 50 feet RJ-45 cable includes an extender plug coupler to allow you to join connections to your existing accessory.

A: Elite strongly recommends using either a standard surge protector or a power conditioner on all electric projection screens.

A: No, the VMAX Tab-Tension Dual does not have a 5-12 volt trigger input.

A: The screen material can be cleaned with mild soap and water

A: No, Elite Screens understand the need to hardwire your electric screen and therefore will not void your warranty.

A: Elite provides binary codes for the IR remote, see below.

Up: 1111 0000 0001
2.35:1: 1111 0000 0010
16:9: 1111 0000 0100

A: The frequency of the RF remote is 433MHz

A: No, your screen’s Top Black border has been set to deploy to its full extent. Attempting to increase will damage the motor and void your warranty with Elite Screens.

A: Each Elite Screens’ model number starts with the product series name. Follow by case color (if applicable, certain models only available in one color), screen material, screen aspect ratio and product series version. Lastly, extra black drop and its length (if applicable). Here is an example.

VMAXT 117 C 94 H -E16

  • VMAXT: VMAX Tab-Tension Dual Series
  • 117: 117″ Diagonal
  • 94: 94″ Diagonal
  • C: Cinema 2.35:1 / H: HDTV 16:9
  • E16: Extra Top Black Drop 16″

A: The power cable length for all VMAX Tab-Tension Dual Series models is approximately 98.4″ (2.5M). Note: This measurement is accurate for USA only, other countries may be equipped with different lengths for each model.

error: Content is protected