Kestrel Tab-Tension Series

with No Comments

A: Yes, you can buy a screen material sample by clicking here.

A: You can extend the length of your cable using the ZSP-12V-50B. This 50 feet RJ-45 cable includes an extender plug coupler to allow you to join connections to your existing accessory.

A: Elite strongly recommends using either a standard surge protector or a power conditioner on all electric projection screens.

A: No, Elite Screens understand the need to hardwire your electric screen and therefore will not void your warranty.

A: The power cord on the Kestrel Series is 6 feet.

A: Elite provides binary codes for the IR remote, see below.

p: 1111 0000 0001
Stop: 1111 0000 0010
Down: 1111 0000 0100

A: Yes, Elite’s electric screen products are compatible with Harmony remotes and in their database.
Please visit the Harmony website for further assistance with programming your remote with our electric screens.
http://myremotesetup.com/easyzapper/New/Main.asp

A: The frequency of the RF remote is 433MHz

A: No, your screen is set to rise to its full extent. Attempting to increase will damage the motor and void your warranty with Elite Screens.

A: The power cable length for all Kestrel Tab-Tension Series models is approximately 98.4″ (2.5M). Note: This measurement is accurate for USA only, other countries may be equipped with different lengths for each model.

error: Content is protected